
Reptiles are very interesting and rewarding animals that can be kept as pets. However, they require a little research on how to look after them correctly. The main part of this is maintaining a normal temperature in their tank or vivarium.
Reptiles are ectotherms which means they are dependent on external temperature and cannot warm up themselves. In nature, they can bask on hot rocks in sunlight but when they are in captivity, they require a heat source. But, that does not mean that you can turn on the heat source and walk away because it doesn’t need to be the right temperature for your reptile pet. All of the reptiles have different ideal heat ranges and do not manage well with any fluctuations in temperature. This is the reason why a reptile thermostat is necessary for a reptile tank as it helps you in maintaining a consistent right temperature.
If you are in a hurry here are a few of our favorite Reptile Thermostat Multiple Probes available:
Image | Title | Why We Like | Rating | |
---|---|---|---|---|
![]() | BN-LINK Digital Heat Mat Thermostat Controller | Best Value | ![]() | Check Price |
![]() | Zoo Med ReptiTemp RT-600 Digital Thermostat Controller | Best Overall | ![]() | Check Price |
![]() | Inkbird Temperature Controller ITC-608T | Most Precise | ![]() | Check Price |
![]() | Pymeter Digital Temperature Controller Dual Probe | Easiest Setup | ![]() | Check Price |
What is a Reptile Thermostat?
A reptile thermostat is a device that can assist in regulating the temperature of your terrarium and ensure a comfortable living environment for your pets. You connect devices like thermal heat pads or heaters to it instead of directly plugging them into mains outlets. The thermostat comes with one or more temperature sensors that must be installed inside the enclosure or terrarium. Users can set a temperature range for the outlet. Whenever the temperature falls below the minimum threshold defined by the user, the thermostat will power on the heater. In case the temperature rises above the maximum value, the thermostat will cut power to the socket, thereby switching off the heater. Some reptile thermostats with multiple probes may have a humidity sensor. They can be used to attach a device like a humidifier or a dehumidifier.
Single vs. Multiple Probe Reptile Thermostats
Reptile thermostats may come with a single sensor or multiple sensors. Devices that have two outlets may use two sensors, one for each of the outlets. You can use the thermostat for connecting two devices at the same time. Some of them may support heating and cooling devices simultaneously.
A single probe reptile thermostat is suitable for small cages and enclosures. The temperature variance in them is minimal, and the difference between the temperatures of opposite sides won’t be significant. Reptile thermostats with a single probe can be used for reptile species that are not as sensitive to temperature changes.
Reptile thermostats with multiple probes are ideal for large cages or enclosures. They have at least two temperature sensors, one of which can be placed on one side of the terrarium and the other on the opposite side. Having two points of measurement ensures a more consistent temperature throughout the reptile’s habitat. It is excellent for species that are highly sensitive to temperature changes.
Why Do You Need Reptile Thermostats?
If you live in areas that are cold or experience temperature fluctuations, then you will have to invest in a reptile thermostat. Reptiles, being ectotherms, rely on their surroundings to warm up their body. Individuals who like to keep their homes cool, especially in summers, may want a reptile thermostat to give their pets an agreeable environment. A temperature in the 70s or low 80s may appeal to you but might be uncomfortable for reptiles. They can absorb the heat from a heater or a pad.
If you need to control both the temperature and humidity of the terrarium or enclosure, then a reptile thermostat with multiple probes will be the perfect fit. Consider a model that has one temperature and one humidity sensor. You can plug in a heating pad as well as a humidifier or dehumidifier in it. Reptile thermostats with multiple probes are also suitable for environments with extreme temperature variance. They can turn on the heating device when the temperature falls below the desired range and turn on the cooling device if the environment becomes too hot for the enclosure inhabitants. Such a thermostat can be beneficial for species that are highly sensitive to mild temperature changes.
To help you in making the right decision when buying a reptile thermostat, we have listed some of the best and hi-tech thermostats with multiple probes that will protect your reptiles against sudden temperature changes.
Herpstat 2
The Herpstat 2 is a digital proportional thermostat that is ideal for proportional heating. It features a system that continuously monitors and regulates the amount of heat that is produced by it to maintain the target temperature. Moreover, this thermostat is fit for initial warm-ups at times where soft start-up slowly applies power to avoid damage that can be caused by overpowering. Herpstat 2 is perfect for heating a vivarium and can also manage humidity, cooling, and lighting. Fortunately, it can simulate moonlight, sunrise, and sunset due to its selectable temperatures. Moreover, individual day or night schedules can be set as well along with setting different temperatures for each output. To ensure its efficiency, it comes with a low or high-temperature tracking that monitors the heating system. It is a programmable thermostat which also comes with precision temperature sensors. It might not be great for those who are looking for a static temperature that does not vary throughout the day.
BN-LINK Digital Heat Mat Thermostat Controller
BN-LINK Digital Heat Mat Thermostat Controller is an easy to use unit that maintains the right temperature for your reptile. All that is needed to do is plug it in and select your desired temperature by using its large three control button interface. Its LED digital display supports the units in both Fahrenheit and Celsius. Its handy LED heating along with power indicator lights enables you to see the controller’s status even in darkness. Moreover, its temperature probe consists of a 6 feet long cord. This thermostat has an outlet 3-prong ground plug that can be used with any heat mat or heat lamp. Additionally, it controls the temperature range between 40-108 degrees Fahrenheit and has a temperature display range of 32-140 degrees Fahrenheit. But, remember not to immerse the controller or probe in the water. Overall, BN-LINK Digital Thermostat Controller is a perfect solution for providing constant optimum temperature to your reptile pet.
Zoo Med ReptiTemp RT 600 Digital Thermostat Controller
Zoo Med ReptiTemp RT 600 Digital Thermostat Controller enables you to maintain precise control on the temperature of your reptile tank with an easy-to-program LCD interface. It is a simple and compact digital thermostat controller that has a remote temperature sensor with a 6-foot long cable as well. It is ideal for managing one vivarium only. All you need to do is just plug it in your heating device of up to 600 watts or a cooling device of up to 150 watts, and set the mode and desired temperature. This thermostat controls a temperature range of 50-122 F. Moreover, in case of power fails the Zoo Med Reptitemp 6T 600 features a built-in memory that retains the settings. Also, it comes with an audible and visual alarm that alerts you if the temperature gets too low or too high.
Encompass All Terrarium Temperature Controller
Encompass All Terrarium Temperature Controller is an affordable and simple device that does not take much space in your room. It allows you to control up to 1000 watts with 3 power outlets. Furthermore, it can maintain a constant temperature for your reptile pet between the ranges of 68-95 degrees Fahrenheit, with a safety shut-off at 110 degrees Fahrenheit. Apart from its usefulness for your reptiles, this thermostat can also be used for seed germination and home brewing. It features an LED heating indicator and easy to set temperature control along with a cable and an external probe for an accurate reading. Encompass All Terrarium Temperature Controller is one of the perfect choices for regulating the temperature in reptile terrariums and small pet enclosures.
Inkbird Pre-Wired Electronic Heating Thermostat Temperature Controller
Inkbird Pre-Wired Electronic Heating Thermostat Temperature Controller operates both as a thermostat and a timer. It is an easy to use device that supports reading units for Fahrenheit or Celsius. It provides separate settings for day and nighttime operation based on the physiological needs of your pet and plants for 24 hours. In addition to this, it can handle two heating devices for a sum of 1200 watts and 10 amperes. Apart from reptile husbandry, it can be used for germinating seeds, incubating eggs, pet breeding, and fungus fermenting as well. The package includes a remote probe sensor along with a 6.5-foot long cord that is accurate to minus or plus 1 degree Fahrenheit.
iPower Digital Heat Mat Thermostat Controller
iPower Digital Heat Mat Thermostat Controller allows you to control up to 1000 watt worth heating devices such as heat mats. It can control a temperature range between 40-108 degrees Fahrenheit and has a temperature display range of 32-140 F. It provides consistent customized temperature for reptiles, seed germination, rooting, fermentation and home brewing. It is ideal for keeping your various environments in their optimum temperature range. Moreover, the iPower Digital Heat Mat Thermostat Controller features easy plug-in operation and comes with LED indicator lights along with the 3-prong grounded plug as well.
Inkbird Thermostat ITC608T Dual Temperature Probe Temperature Controller
Inkbird Thermostat ITC608T is an excellent reptile thermostat with multiple probes. It comes with two temperature sensors and has two separate interfaces for plugging each sensor. Alternatively, you can buy a variant of the Inkbird Thermostat ITC608T with one temperature sensor and one humidity sensor. The included temperature sensors are waterproof, and you can use them in moist conditions. Inkbird Thermostat ITC608T has two power outlets and supports both heating and cooling devices. You can connect a maximum load of up to 1800W at 120V and 15A. The reptile thermostat with multiple probes supports calibration, compressor delay for cooling devices, and saving of settings for power outages. Its display has separate PV and SV windows and can show the temperature in Celsius and Fahrenheit. You can use it for extreme weather conditions.
Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat
Pymeter Digital Temperature Controller is a highly-recommended option among reptile thermostats with multiple probes. It supports two highly accurate waterproof temperature sensors and has two outlets for connecting heating or cooling devices. You can operate both the attached devices at the same time or separately. The On and Off temperature set-points can be defined for each outlet individually. Pymeter Digital Temperature Controller boasts of features like power-off memory (to save settings in case of power failure) and power-on delay (for protecting devices with compressors like cooling pads). It also supports temperature calibration. The reptile thermostat with multiple probes enables you to set alarms when the limits for high or low temperature are breached. Pymeter Digital Temperature Controller is suitable for aquariums, greenhouses, and terrariums in addition to reptiles.
Dual Digital Display Thermostat Temperature Regulator Temperature Controller with Double NTC Probe Sensor Probe Two Relay Output 110V/AC220V
Buyers who want an affordable reptile thermostat with multiple probes may consider the Dual Digital Display Thermostat. It allows you to control the temperature in a reptile’s enclosure by connecting heating or cooling devices to it. There are two digital displays on the device for showing the temperatures. You can change the values and modes using the four buttons provided. The Dual Digital reptile thermostat with multiple probes does not have 3-pin outlets for connecting devices. Instead, you will have to attach their wires to the screw terminals provided on the rear. The included temperature sensors must also be attached in the same way. It supports automatic delay for compressors of cooling systems as well as automatic overtemperature alarm. Another variant of the thermostat is available with one temperature and one humidity sensor.
DIGITEN DHTC-1011 Temperature and Humidity Controller
DIGITEN DHTC-1011 Temperature and Humidity Controller is another reptile thermostat with multiple probes. It is suitable for individuals who live in a humid environment or want to monitor and control their reptile enclosure’s temperature and humidity. There are two outlets provided on it, one for plugging in a heating pad and the other for a dehumidifier. DIGITEN DHTC-1011 reptile thermostat supports temperature calibration and compressor delay functionalities. You can choose between Fahrenheit and Celsius units while the humidity is displayed in percentage. A large screen shows both the readings simultaneously. DIGITEN DHTC-1011 is a good reptile thermostat with multiple probes that will suit terrariums.
PETSPIONEER Temperature & Humidity Controller Reptile Timer
The Temperature & Humidity Controller from PETSPIONEER is a decent option among reptile thermostats with multiple probes. It uses a humidity sensor and a temperature sensor. There are three sockets on the controller – one for a heater, another for a dehumidifier, and an additional third slot that can be scheduled to turn on or off based on a timer. A large display provides all the required information. This reptile thermostat with multiple sensors makes use of a memory battery for savings settings even when the power is turned off. There are presets provided for tropical and desert environments in the PETSPIONEER reptile thermostat.