kets. You can plug in a heating and a cooling device at the same time in its outlets or use a single device of any type. It can supply up to 1650W output at 110V. The thermostat uses an NTC 10K temperature sensor and supports measurements from -58°F to 230°F (-50°C to 110°C) with ±0.5° accuracy. Its two independent displays can show the temperature readings in Celsius and Fahrenheit. You can also set temperature-based alarm notifications.

10. DIGITEN Digital Thermostat Outlet Controller DTC-101

Terrarium owners searching for the best reptile thermostat can also consider DIGITEN Digital Thermostat. It is a multifunctional item that supports heating and cooling modes. The large LCD of the device can show temperature readings in Celsius and Fahrenheit. It uses a silicone temperature sensor that is waterproof. Its measurement range is -40°F to 248°F (-40°C to 120°C) with ±1° accuracy. The thermostat allows you to connect a single device with a maximum load of 1100W at 110V. It also supports sensor fault and over-temperature alarms.

-stage filtration process ensures optimal living conditions for the aquatic life in your fish tank. The first two stages use porous foam and dense polyester for mechanical filtration. Then the activated carbon insert gets rid of chemical impurities. Next, the water flows through a Bio-Screen for removing any remaining debris. The final stage consists of C-Nodes that promote the growth of beneficial bacteria that remove ammonia and nitrites. It can be installed on the back of a tank with a clip and is easy to maintain.  There are three variants of the Fluval C Power Filter available that will suit up to 30-gallon, 50-gallon, and 70-gallon aquariums respectively.

8. MarineLand Penguin 200 BIO-Wheel Power Filter

When it comes to the best hang-on-back (HOB) filters, MarineLand Penguin 200 BIO-Wheel Power Filter is a great product. It provides three-stage filtration for removing mechanical, chemical, and biological impurities in the water. Your fish tank will be free from waste, odors, and discoloration. Its Bio-Wheel is specifically designed to tackle ammonia and nitrites in the water while promoting the growth of beneficial bacteria. This model has a flow rate of 200GPH and will be suitable for 30 to 50-gallon aquariums. MarineLand Penguin  BIO-Wheel Power Filters are also available in smaller and large capacities.

9. AquaTop PF40-UV Power Filter (HOB) with UV Sterilization

AquaTop PF40-UV is a versatile product among the best hang-on-back (hob) filters. It has a 7-Watt UV bulb in addition to mechanical and chemical filtration media for keeping your fish tank clean and healthy. The bulb gets rid of free-floating algae and parasites. There is a self-adjusting skimmer in the unit as well for cleaning the surface of the water. The filter uses a 7-Watt pump that has a flow rate of 128GPH. It will be able to filter water efficiently in 15 to 40-gallon aquariums. A knob allows you to adjust the flow rate as required. You can use AquaTop PF40-UV Power Filter in freshwater and marine setups. Smaller variants of this HOB filter are also available.

10. Aqua-Tech Power Aquarium Filter w/ 3-Step Filtration

Aqua-Tech Power Filter is a popular choice of the buyers who are looking for the best hang-on-back (hob) filters. It uses a 3-stage filtration process for keeping aquariums clean. The filter comes with coarse floss for mechanical filtration, activated carbon to get rid of odors and discoloration, and Bio-Tech Biological Grid for eliminating ammonia and nitrites. It is easy to install and maintain thanks to its HOB design. Aqua-Tech Power Filters are available in four different sizes that will be suitable for 5 to 15-gallon, 10 to 20-gallon, 20 to 40-gallon, and 30 to 60-gallon aquariums respectively.

net. Then add the remaining water from the bag to the bowl. Your Betta Fish Bowl Setup is now complete.

Maintaining A Betta Fish Bowl Setup

One of the most important aspects of Betta fish bowl setups is maintenance. You can use a filter with the bowl though it may not be feasible with all bowls. Most people who keep a Betta in a bowl change the water manually.

Pour two-thirds of the water into a clean container and transfer the fish into it. Discard the remaining water and clean the bowl and gravel using lukewarm tap water to get rid of any waste and debris. Then fill one-third of the bowl with fresh tap water that is around 75°F. Add a water conditioner to the tap water for getting rid of chlorine and making it suitable for the fish. Then transfer the fish to the bowl. Add the water that was initially poured to the clean container back into the bowl. Consider changing one-third of the water in the bowl every 5 to 7 days.

ish and make the aquarium look good. They won’t occupy as much space and still add to the appeal of your aquarium.

Add a Background or Wallpaper

One of the simplest small aquarium decoration ideas is to add a background or wallpaper. There are many 3D wallpapers and fish tank backgrounds available that can add depth and dimension to your aquarium. They can make the aquarium look bigger than it actually is. Their designs add color and contrast as well. They are easy to install and don’t require any maintenance.

Use a Waterfall Filter

You can add a waterfall to small aquariums without having to sacrifice space. There are many power filters and submersible filters that you can hang on the side of your fish tank. They pour back the filtered water into the tank by creating a waterfall. It will serve the dual purpose of a filter and a decorative item.

!-- wp:heading -->

Aqueon Forge Aquarium Stand

Aqueon Forge Aquarium Stand is a versatile product when it comes to the best 36-gallon fish tank stands. It can accommodate not one but two aquariums. Its top shelf can be used for up to a 37-gallon aquarium that is 30” long and 12” deep. The bottom shelf allows for a standard 15-gallon fish tank that measures 24”x12”. Its steel construction with a powder-coated finish ensures excellent durability and corrosion resistance. The wood panels used are reversible and give you the option of brown and black colors.

Ameriwood Home Alta Vista Aquarium Stand

Ameriwood Home Alta Vista Aquarium Stand is a double-door alternative among the best 36-gallon fish tank stands. It is designed for 29 to 37-gallon aquariums and has a maximum load capacity of 350lbs. A double-door on the front provides access to a storage compartment. It has two fixed and two adjustable shelves for storing essentials and equipment while hiding them from view. It is made from laminated particleboard and MDF and comes with an attractive black finish and brushed nickel door handles.